Berthing port side with strong off-shore wind

	Approach at a broad angle.
	Weather helm to hold the bow upwind.
	Head for the stern of the berth.
	Engine reversed when vessel's bow near stern of the berth (2).
	The swing created and lee drift increased.
	Head lines with messenger passed when bow is close in.
	A stern line is also passed when stern is close to berth.
	Lines are hove-in when the vessel is parallel to berth.
	An offshore anchor may be used. It is let go when the ship has bodily drifted from the berth (3).

Comments

IAMSAR Search Pattern : Loren Turn

IAMSAR Search Pattern : Loren Turn 👇 Loren turn IAMSAR Search Pattern Advantage: 1 Facilitate launch and recovery of rescue boat 2 Facilitate rescue work by other crafts 3 Circling calms the sea by disturbing wave patterns 4 The more turbulence created by ship the better 5 Additional ship circling windward will calm the seas furthur Loren turn Procedure: 1 Head into the wind at full speed 2 Begin the circle 3 Reduce to slow to when wind is abeam 4 When wind crosses stern to opposite quarter , increase to half speed 5 Continue circling as long as calm water is needed 6 Slow down or stop , to lauch and recover rescue boat on leeward side, inside the circle. Note: It is important to know handling charactristic of your vessel. Depending upon ships handling criteria it may not be necessary to begin Loren turn head to wind.

Duties & Responsibilities of the On-Scene Co-ordinator (OSC):-IAMSAR

Duties & Responsibilities of the On-Scene Co-ordinator (OSC) :- Co-ordinating operations of all SAR facilities on-scene. Receiving the search action plan or rescue plan from the SMC (SAR Mission Co-ordinator) or planning the search or rescue operation, if no plan is otherwise available. Modifying the search action or rescue action plan as the situation on-scene dictates, keeping the SMC advised. Co-ordinating on-scene communications. Monitoring the performance of other participating facilities. Ensuring operations are conducted safely, paying particular attention to maintaining safe separations among all facilities both surface and air. Making periodic situation reports (SITREP’s) to the SMC. The reports should include but not be limited to: Weather and sea conditions. The results of search to date. Any actions taken Any future plans or recommendations Maintaining a detailed record of the operation: On-scene arrival and departure times of SAR facilities, other vessels an

Ship Mooring & Various types of Moor

MOORING: WHAT IS IT? & VARIOUS VESSEL MOORINGS Tips for safe mooring operations Mooring and unmooring operations hide a number of risks for those who get involved, many times leading to a fatal accident or a collision; Thus, it is of a great importance when conducting any mooring operation to follow specific steps to ensure the safety of all those conducting the operation. 1 Use Appropriate Lines a. Choose based on size and operational requirements Choosing the ideal mooring lines depends on local factors such as the water depth, the tidal range and wave energy, as well as on the material the mooring lines are constructed from. The combination of both the material and the conditions where a vessel is to conduct its mooring operations, play a crucial role for the operation to be fruitful. When opting for the mooring line keep in mind the: Weight and diameter of the line in comparison to required strength. Elasticity of the material. Durab

The Sailing Beast

Search This Blog